|
FEATURE
|
BENEFIT
|
1
|
PUMPING SECTION
|
| 1.1 |
Inverted Volute Chamber & Impeller with Side Suction |
Pump is placed on top of dirt not in it no need for water filtering screen.What it swallows it will pump. |
| 1.2 |
Vortex Pumping |
Ability to pump grit, fibers and small stones, without jamming. |
| 1.3 |
Inverted Impeller & Volute are made of SG42 CastIron |
Allows for flood feed through the sides, no suction required and hard wearing. |
| 1.4 |
Detachable Impeller cover with “o” ring seal. |
Three 17mm bolts remove the “O” ringed cover, gaining quick access to impeller for cleaning. |
| 1.5 |
Optinal High volume non-return valve. |
Helps to keep dirt out of the pump, when it stops pumping. |
| 1.6 |
Ability to lift the pump out of the water while running. |
Pump will maintain water pressure when lifted out of the water lowing transfer to next pump position with little back flow. |
2
|
MOTOR SECTION
|
| 2.1 |
Environmentally Friendly Lubrication-free motor. |
Motor can run continuously without oil, eliminating environmental oil pollution and has an extended motor life. |
| 2.2 |
Stainless steel Cylinder and hardened & rust-free motor parts. |
Rust free and highly wear resistant. |
| 2.3 |
An Inverted Impeller allows no high pressure water on spindle seals. |
Spindle seals control low exhaust air pressure in motor housing, from entering the pump volute. There is no high pressure water being controlled. |
| 2.4 |
Ability to run continuously out of water. |
Motor housing seal is cooled by air passing through the motor into the exhaust. |
| 2.5 |
SG42 Cast Iron Body. |
Very tough and durable |
| 2.6 |
Ergonomically designed carry handle. |
Easy to carry and is also the exhaust housing. |
3
|
FILTER INLET SECTION
|
| 3.1 |
Built in high capacity in line micro filtering system,with a flushable and replaceable filter element. |
Day to day element cleaning is easy and accessible and replacing is via external screw off cap. |
| 3.2 |
Filter Element |
Filter Filters out dirt down to 120 micron particles. |
